Get 10% Off on orders above ₹1000
Free Delivery on Orders Above ₹499
A Complimentary Gift with Every Order
Get It Delivered in 1–4 Hours
Description
xAsian Paints SmartCare Damp Proof Ultra is a fiber reinforced elastomeric liquid applied waterproofing membrane. It
is formulated with PU hybrid polymers and reinforcing acrylic fibers. Upon curing, it forms a thick, seamless, durable
membrane thus offering ultimate waterproofing.
Product features
xProduct Key Features
- Waterproofing - Resists positive hydrostatic pressure up to 10 bars.
- Crack Bridging - Bridges cracks up to 2.5 mm at 650 microns.
- Surface Temperature Reduction - Can reduce surface temperature by up to 10°C.
- Fiber Reinforced - Acrylic fibers improve mechanical strength and abrasion resistance.
- Strong Adhesion - Excellent adhesion to concrete and masonry.
- Durability - Resistant to water, UV rays and ageing.
- Anti-Fungal & Anti-Algal - Helps resist fungal and algal growth.
- Anti-Carbonation - Acts as a barrier against carbon dioxide, helping extend structural life.
- Warranty - 10-year waterproofing warranty on terraces and vertical surfaces, subject to the stated top-coat requirement.
Other Features
- Water-based formulation.
- White colour.
- Available in 4 L and 20 L packs.
- Touch dry in approximately 4–6 hours.
- Shelf life of 3 years in the original tightly closed container.
- Horizontal coverage - About 10 sq. ft./L.
- Vertical fresh-paint coverage - About 25 sq. ft./L.
- Vertical repainting coverage - About 35–40 sq. ft./L.
- Can also be applied over existing IPS, sound brick-bat coba, or cementitious waterproofing.
Application areas
x
Roofs & Terraces
Parapet
Sunshades
Exterior Vertical Walls
How to use
x
Plaster - New masonry surfaces must be allowed to cure completely. It is recommended to allow 28 days as the curing time for new masonry surfaces.
Cleaning - Surface should be free from any loose paint, dust or grease. Remove all existing bitumen coatings completely. It is recommended to use intense wire brushing or high-speed water jet for thorough cleaning.
Repairing - The substrate must be checked for its soundness using a small hammer. All cracks at corner joints, channels and parapets should be properly treated.
Filling for Cracks - For filling cracks up to 3 mm, use Asian Paints Crack Seal. Bigger cracks, damaged portions and hollow areas must be repaired with polymer modified cement mortars.
Product catalogue
x
Product Brochure
View / Download
- Choosing a selection results in a full page refresh.
