Get 10% Off on orders above ₹1000
Free Delivery on Orders Above ₹499
A Complimentary Gift with Every Order
Get It Delivered in 1–4 Hours
Description
xTruCare Interior Wall Primer (ST) is suitable for use as a primer for masonry topcoats like distemper, emulsions, lustre and matt wall finishes. It helps in providing a suitable surface for application of subsequent coats of putty and finish paint.
Product features
xKey Features
- Superior Whiteness & Opacity - Creates a strong base that helps the final paint colour stand out.
- Good Sealing Properties - Helps seal the surface and improves adhesion of subsequent coats.
- Smooth Finish - Provides a more uniform base for the finish paint.
- Higher Coverage - Helps maximise top-coat quality and appearance.
- Warranty with Top Coats - Up to 8 years of warranty with applicable top coats.
Other Features
- Solvent Based
- White Colour
- Coverage: Approximately 130–160 sq. ft./L for 1 coat
- Recoat Time: Approximately 6–8 hours
- Available in 500 ml, 1 L, 4 L, 10 L and 20 L packs
Application areas
x
Brick Work
Concrete Surfaces
Plastered Walls
How to use
x
Sand & Clean the Surface - Sand with 180-grit sandpaper and wipe clean. Make sure the surface is free from loose paint, dust, grease and dampness.
Apply First Primer Coat - Apply TruCare Interior Wall Primer (ST) by brush or spray using MTO as thinner where required.
Apply Wall Putty if Required - Fill dents and holes using TruCare Acrylic Wall Putty and allow it to dry.
Sand Again - Sand the putty-treated surface with 180-grit sandpaper and wipe clean.
Apply Second Primer Coat - Apply another coat of TruCare Interior Wall Primer by brush or spray.
Final Sanding - Sand with 320-grit sandpaper and wipe clean before applying the final top coat.
Product catalogue
x
Product Brochure
View / Download
- Choosing a selection results in a full page refresh.
