Roff T09 Non-Skid Adhesive (NSA) White

Clean the surface thoroughly before application.

Saturate the surface with water until it reaches SSD (Saturated Surface Dry) condition.

Add the required quantity of water into a clean mixing container.

Gradually add the adhesive powder to the water while mixing.

Mix thoroughly using a mechanical mixer until a smooth, lump-free consistency is achieved.

Check the material consistency before application.

Allow the mixture to rest for 5 minutes, then remix before use.

Spread the adhesive evenly using a notched trowel.

Apply adhesive to the back of the tile using the back buttering method for improved coverage.

Place the tiles within the recommended open time.

Move the tile opposite to the notch direction, tap gently to ensure proper adhesion, and allow 24 hours for setting.

Fill the tile joints with Roff Starlike grout after the adhesive has fully cured.