Roff T25 Yogafix Grey

Clean the surface thoroughly before application.

Saturate the surface with water until it reaches SSD (Saturated Surface Dry) condition.

Add the required quantity of water into a clean mixing container.

Gradually add the powder to the water while mixing.

Mix the material thoroughly using a mechanical mixer until a smooth, lump-free consistency is achieved.

Check the material consistency before application.

Allow the mixture to rest for 5 minutes, then remix before use.

Spread the adhesive evenly using a notched trowel.

Apply adhesive to the back of large tiles or stones using the back buttering method.

Place the tiles within the recommended open time.

Move the tile opposite to the notch direction and tap gently to ensure proper bonding.

After the adhesive has cured, fill the joints using Roff Starlike grout.