Pack Sizes and Coverage

Tube Packs - 5g to 270g

Tube packs range from 5g to 270g, covering 5g, 9g, 13g, 36g, 90g, 180g and 270g options. These smaller formats suit controlled adhesive use where measured quantities are needed for specific repairs, furniture work, framing and other smaller bonding applications.

Container Packs - 450g to 5.4kg

Container packs of Araldite standard epoxy resin range from 450g to 5.4kg, including 450g, 700g, 1.08kg, 1.8kg, 3.6kg and 5.4kg sizes. The 1.8kg set covers up to 120 sq. ft., making larger packs practical for regular fabrication and repeated bonding work and larger project requirements.

Matching Pack Size to Job Size

Choose the pack based on adhesive consumption, application area, and frequency of use. For reference, a 1.8kg set covers up to 120 sq. ft. Larger 3.6kg and 5.4kg packs suit repeated work, while smaller packs suit limited applications and repairs.

Resin and Hardener System

Grades Supplied AW 106 IN and HV 953 IN

Araldite Standard uses Araldite resin and hardener, supplied as AW 106 IN resin and HV 953 IN hardener, to form its matched adhesive system. Together, they form a two-component epoxy adhesive designed for high-strength bonding across metals, stone, wood, glass, ceramic, rubber, and other listed substrates.

Mixing Ratio

The resin and hardener are mixed in a 1:1 ratio by volume. Equal quantities of both components must be measured before mixing. Thorough mixing creates a consistent adhesive mixture and supports the intended bonding performance of the system.

Pot Life and Cure Time

After mixing, the adhesive has a working pot life of 45 to 50 minutes, giving sufficient time for application. The stated setting time is 6 to 7 hours. Keep bonded surfaces clamped and undisturbed during curing.

Bonding Performance

Bond Strength on Metal, Stone and Glass

Araldite Standard delivers a bond strength of up to 120 kg per sq. cm, with a load-bearing capacity above 470 kg. It supports demanding bonding applications involving metal, stone and glass, where a durable joint is required.

Water, Heat and Chemical Resistance

The cured adhesive is designed to withstand water, heat and chemical exposure, making it suitable for applications exposed to moisture and changing conditions. Its waterproof and heat-resistant properties support long-lasting bonding across suitable substrates.

Compatible Surfaces

Recommended Substrates

Araldite Standard is formulated for bonding a broad selection of rigid and flexible materials. Recommended substrates include metals, stone, wood, glass, ceramic, rubber, dry concrete, asbestos, cement board, bison board, fabric, leather, and most rigid plastics. Proper surface preparation supports better adhesion.

Surfaces It Will Not Bond

The product is not intended for every material or surface condition. Surfaces such as polyethylene, polypropylene, and PTFE generally have low surface energy, which can make epoxy adhesion difficult. Always check substrate compatibility and prepare the surface correctly before application.

Standard or Klear

Repairs, Fabrication and Small Jobs

It is suited to repair and fabrication work where higher bond strength and broader coverage are required. Its range of smaller packs supports controlled use for furniture repairs, metal fixing, stone work, glass applications and other maintenance tasks.

Site Work and Bulk Consumption

For larger site requirements and regular production use, Araldite Standard is available in container sizes from 450g to 5.4kg. A 1.8kg set covers up to 120 sq. ft., making larger packs suitable for repeated bonding applications and higher consumption.

How to Apply

Surface Preparation

Start by preparing both surfaces before applying the adhesive. Remove dust, grease, oil and other contaminants, then allow the surfaces to dry completely. For smooth materials, lightly roughen the bonding area to improve surface contact and adhesion.

Mixing and Spreading

Take equal quantities of the resin and hardener by volume and mix them thoroughly until the mixture becomes uniform. Apply the prepared adhesive as a thin, even layer across the bonding area. Use the mixture within its 45 to 50 minute pot life.

Clamping and Handling Time

Bring the prepared surfaces together immediately after spreading the adhesive and keep them firmly aligned. Use clamps or suitable support to prevent movement during setting. The product takes approximately 6 to 7 hours to set, with overnight clamping recommended for the bonded joint.

Ordering from Bangalore

Stock and Same-Day Dispatch

Order Araldite Standard epoxy adhesive based on your required pack size and project quantity. Before placing an order, confirm the availability of the selected 5g to 5.4kg pack and ask about same-day dispatch options for Bangalore delivery requirements.

Trade and Bulk Enquiries

For workshops, fabricators, contractors and industrial buyers, larger quantities can be planned around regular adhesive consumption. Discuss your required pack size, quantity and application to receive suitable supply options and the latest Araldite Standard epoxy adhesive price for bulk orders.

Araldite Standard vs Klear

Choose between Araldite Standard and Klear based on the application and finish required. Araldite Standard is designed for high-strength bonding across multiple substrates, with strong performance on metal, stone, wood, glass and ceramic. Klear is better suited when a clear adhesive appearance is important. Standard also offers up to 120 sq. ft. coverage per 1.8kg set, making it practical for larger bonding work. Compare the specific product requirements before selecting the right adhesive for your application.

FAQ

1. What is the shelf life of an unopened Araldite Standard pack?

The shelf life depends on the specific pack and storage conditions. For an unopened Araldite Standard pack, check the manufacturing date, expiry information and storage instructions printed on the original packaging before use. Keep the resin and hardener sealed until required.

2. Why has my Araldite Standard not set properly?

Incorrect mixing can affect curing. Araldite Standard requires resin and hardener to be mixed in a 1:1 ratio by volume. Poor surface preparation, contamination, incomplete mixing or movement during curing can also affect setting. Prepare clean, dry surfaces and allow the joint sufficient time to set.

3. Can Araldite Standard fill gaps between uneven surfaces?

Araldite Standard is a two-part epoxy adhesive designed to bond properly prepared surfaces. It can accommodate minor surface irregularities, but large gaps should not be filled by applying excessive adhesive. A properly fitted joint generally provides better bonding performance. Where surfaces are uneven, prepare and align the surfaces correctly before applying a thin, even adhesive layer across the bonding area.

4. Can the cured adhesive be sanded, drilled or painted over?

Once Araldite Standard, a strong epoxy adhesive, has fully cured, mechanical finishing such as sanding or drilling may be possible depending on the bonded material and application. Painting may also be possible after adequate curing and suitable surface preparation. Test the finishing method on a small area first when the appearance or integrity of the bonded joint is important.

5. How do I know I'm buying genuine Araldite?

Purchase Araldite from a reliable and established supplier and inspect the original packaging before accepting the product. Check the product name, resin and hardener details, pack size, manufacturer information, batch details and expiry information. For professional applications requiring a two-part epoxy adhesive, request a proper invoice and relevant product documentation from the supplier.